These groups combine equivalent MOT comments, such as the same tyre note on different corners. Counts are comment occurrences in the sample, not a percentage of cars.
Tyre wear
VehicleScore® MOT data includes 1,245 advisory comments and 154 failure comments in this group. Seen as both an advisory and a failure reason. These are comment occurrences, not a share of all cars.
These MOT comments record tyres that were worn, damaged, or close to the legal tread depth when the car was inspected.
What to inspect
Check the tread depth and look for uneven wear, cracking, or damage on all four tyres.
Example MOT wording: NEARSIDE FRONT TYRE WORN CLOSE TO LEGAL LIMIT/WORN ON EDGE (5.2.3 (E))
Brake pad wear
VehicleScore® MOT data includes 337 advisory comments and 71 failure comments in this group. Seen as both an advisory and a failure reason. These are comment occurrences, not a share of all cars.
These MOT comments record brake pads that were worn or below the inspection limit.
What to inspect
Ask for recent pad replacement and look at the remaining pad thickness.
Example MOT wording: REAR BRAKE PAD(S) WEARING THIN (1.1.13 (A) (II))
Brake disc wear
VehicleScore® MOT data includes 210 advisory comments in this group. Seen mainly as an advisory. These are comment occurrences, not a share of all cars.
These MOT comments record brake discs that were worn, scored, pitted, or corroded.
What to inspect
Look at the disc faces for deep scoring, a lip at the edge, and corrosion.
Example MOT wording: FRONT BRAKE DISC WORN, PITTED OR SCORED, BUT NOT SERIOUSLY WEAKENED (1.1.14 (A) (II))
Oil leak
VehicleScore® MOT data includes 87 advisory comments in this group. Seen mainly as an advisory. These are comment occurrences, not a share of all cars.
These MOT comments record an oil leak noted by the tester. Shock absorber misting is counted as a damper issue, not as an engine oil leak.
What to inspect
Look under the engine for fresh oil, and check the oil level.
Example MOT wording: OIL LEAK, BUT NOT EXCESSIVE (8.4.1 (A) (I))
Corrosion
VehicleScore® MOT data includes 86 advisory comments in this group. Seen mainly as an advisory. These are comment occurrences, not a share of all cars.
These MOT comments record corrosion the tester could see on the body or structure. Corrosion already named on a spring, brake, or other component is counted with that component.
What to inspect
Inspect the underside, sills, and subframe for heavy corrosion, especially where an advisory mentions it.
Example MOT wording: REAR SUB-FRAME CORRODED BUT NOT SERIOUSLY WEAKENED (5.3.3 (B) (I))
Emissions test issues
VehicleScore® MOT data includes 37 failure comments in this group. Seen mainly as a failure reason. These are comment occurrences, not a share of all cars.
These MOT comments record an exhaust emissions result. They are counted separately from a warning lamp or a catalytic converter note.
What to inspect
Ask for the emissions printout and whether any repair followed a failed test.
Example MOT wording: EXHAUST EMISSIONS EXCEED MANUFACTURER'S SPECIFIED LIMIT (8.2.2.2 (A))
Lamp and bulb faults
VehicleScore® MOT data includes 18 failure comments in this group. Seen mainly as a failure reason. These are comment occurrences, not a share of all cars.
These MOT comments record a lamp or bulb other than a headlamp or indicator.
What to inspect
Switch on the side, brake, fog, and number-plate lamps.
Example MOT wording: OFFSIDE FRONT POSITION LAMP NOT WORKING (4.2.1 (A) (II))
Parking brake faults
VehicleScore® MOT data includes 17 failure comments in this group. Seen mainly as a failure reason. These are comment occurrences, not a share of all cars.
These MOT comments record a parking brake that did not hold well enough or had a component defect.
What to inspect
Test that the parking brake holds the car on a slope and releases cleanly.
Example MOT wording: PARKING BRAKE EFFICIENCY BELOW REQUIREMENTS (1.4.2 (A) (I))
